THE LASER SYSTEM FOR CUTTING METAL TUBES
With this tube cutting system you can easily process metal tubes with a diameter of up to 12 mm.
The fully automatic cutting process takes place in the closed, laser-safe working chamber and can be observed through
a protection window. This means you can work without additional safety precautions against laser radiation.
The system is available with a laser power of 150 or 300 W. The cutting process is controlled either by touch screen or
automatically by software.
This laser system is mainly used in tube processing for sensor manufacturing as well as in precision engineering and medical technology.
Active medium | Ytterbium |
Wavelength | 1070 ± 10 nm (invisible, near infrared) |
Pilot Laser | 630 – 680 nm (≤ mW) |
Laser protection class | 1 |
Average power | 250 W (CW), 150 W (pulsed) |
Peak pulse power | 250 W (CW), 1500 W (pulsed) |
Pulse duration | 0.2 ms – CW (continuous wave) |
Pulse frequency | 0 – 10 kHz |
Laser cooling system | Integrated air cooling |
Focal spot ∅ | approx. 80 μm |
Observation lens | Stereo microscope attachment 10x ocular, visual field ? 16 mm |
Focal distance | f=80, optionally f=56 mm |
Cutting gas supply | Included |
Cutting smoke extraction | Connectible externally |
Unit (W × D × H) | 270 cm x 100 cm x 150 cm |
Footprint | 300 cm x 120 cm x 150 cm |
Weight | approx. 913 kg |
Electrical connection | 3-phase 3 x 400 V, 50 - 60 Hz, 3 x 10 A + neutral and grounding conductor |