AL-IN
OUR ENTRY-LEVEL LASER SYSTEM FOR LASER WELDING
- Technical data
- Downloads
- Your direct contact
- Accessories
The AL-IN is a robust and extremely flexible laser system for laser welding of small and large parts.
The system consists of a 150 W or 200 W laser for welding all common metals, a lifting column with X, Y and Z travel and a control unit for the axes. You can use the integrated touch panel to teach surfaces, access apps for rotary components or to control an optional wire feed system. The parts to be welded can be positioned independently from the movement system because a wide variety of work tables can be placed in front of the lifting column. | Or you can weld directly on the pallet truck or pallet. This is possible because the resonator can be turned to the side or back (nearly 360°). The resonator, which sits in a slide rail, can also be placed far forward. This gives you the flexibility to weld small and large workpieces. Optionally we supply a fixed table top for the lifting column. The special feature about the AL-IN is that it is not the workpiece that is moved, but the resonator. |
The AL-IN also offers expansion options.
Optionally you get
- Our turn and tilt optics
- The patented multifunction foot switch
- An Ergo wedge
- an axis of rotation
- and a wire feed system
Your benefits at a glance:
- Can be used flexibly
- Robust
- Powerful
- Inexpensive
- And expandable with many options
- AL-IN 150
- AL-IN 200
-
AL-IN 150 - Download data sheet
- Laser
Laser type/Wave length Nd:YAG, 1064 nm Average power 150 kW Peak pulse power 9 kW Pulse energy 75 J Pulse duration 0.5-20 ms Pulse frequency -100 Hz Operating mode pulsed Welding spot Ø 0.2-2.0 mm Focusing objective 150 mm, further according to lens data sheet Pulse shaping Adjustability of power curve within a laser pulse Display & operation Display with membrane keyboard. 2 step footswith, no Interface for external triggering available - Observation lens
Leica microscope attachment with eyepieces for glasses wearers, 10 ×, Optional 16 ×. - Power supply unit Laser AL
W × D × H (basic component) 820 × 400 × 910 mm Weight 120 kg - Laser beam source
With focusing unit (length × Ø) 900 × 120 mm Weight approx. 18 kg - Electrical connection
3 × 400 V / 50-60 Hz / 3 × 16 A
- Laser
-
AL-IN 200 - Download data sheet
- Laser
Laser type/Wave length Nd:YAG, 1064 nm Average power 200 kW Peak pulse power 9 kW Pulse energy 90 J Pulse duration 0.5-20 ms Pulse frequency -100 Hz Operating mode pulsed Welding spot Ø 0.2-2.0 mm Focusing objective 150 mm, further according to lens data sheet Pulse shaping Adjustability of power curve within a laser pulse Display & operation Display with membrane keyboard. 2 step footswith, no Interface for external triggering available - Observation lens
Leica microscope attachment with eyepieces for glasses wearers, 10 ×, Optional 16 ×. - Power supply unit Laser AL
W × D × H (basic component) 820 × 400 × 910 mm Weight 120 kg - Laser beam source
With focusing unit (length × Ø) 1100 × 120 mm Weight approx. 20 kg - Electrical connection
3 × 400 V / 50-60 Hz / 3 × 16 A
- Laser
Technical accessories
Ergo wedge 5°-25°
Enables tilting of the binocular for ergonomic working
Programmable laser wire feed system LAfet (only in combination with a laser work bench)
Welding wires from 0.3 - 0.5 mm are very precisely and automatically fed with the LAfet.
Rotary axis module
For welding cylindrical parts Tiltable for horizontal to vertical rotational movement. With chuck Ø 125 mm and inside diameter 24 mm
Turn and tilt objective
Our tilting objective significantly eases work in difficult workpiece positions. In the objective's full 360° rotational range, the beam can be directed continuously up to 40° from the vertical. Moving the workpiece is not required. The beam can be conveniently directed towards difficult to access locations while maintaining an ergonomic work posture. With focusing objective f = 150, LED ring light and protection glass
Handheld welding laser
